We will be closed December 24th/25th and December 31st & January 1st
- 1-888-378-9021
- Mon-Fri / 8am to 5pm EST
Autotrol Logix Controlled Valves
ILLUSTRATION & PART NUMBER |
DESCRIPTION | SUGG. RETAIL |
Autotrol Logix Series Controlled Valves
Autotrol 255 Valves with Logix Controllers
|
||
$318.00 $361.00 $367.00 $498.00 |
Autotrol 268 Performa Valves with Logix Controllers
|
||
$345.00 $534.00 $566.00 |
Autotrol 263 Performa Filter Valve with Logix Controller
|
||
$345.00 $372.00 |
Autotrol 268 Performa FA Filter Valve with Logix Controller
|
||
$346.00 |
|
||
$6.50 $6.50 $6.50 $6.50 $6.50 $6.50 |
25740-H00-LOG |
PERFORMA WITH LOGIX CONTROLLER |
Autotrol Logix Series Controlled Valves The Logix Controller is unrivaled in simplicity and is easier to program than any other electronic controller
on the market today. The Logix Controller is factory-programmed with complete salt tables
and operational parameters. The resin volume is set, then only the time of day, day of the week, The Logix 740 time clock – This simple time clock controller gives the installer the option of a 7-day
(day of the week) or up to a 99-day regeneration frequency setting. The 740 can also be used for
either a softener or filter application (with adjustable backwash time). Includes a remote regeneration The Logix 742 time clock – This control has been enhanced for C&I applications. The 742 offers fullyprogrammable cycle times, salt setting in 1-pound increments, as well as the Maintenance Interval™ feature. This controller will work on all GE Water Technologies valves from the three quarter-inch 255 all the way up to the sixinch AquaMatic valve-nest system. The Logix 760 demand controller – This economy model demand control will set a new standard for simple and efficient controllers. The 760 includes single programming, with a 28-day variable reserve feature and the ability to change the time of regeneration. This cost-effective controller is a great for residential and light commercial applications up to 3 ft3 of resin. The Logix 762 demand controller – This control has been enhanced for C&I applications. The 762 offers fully-programmable cycle times, salt setting in 1-pound increments, as well as the Maintenance Interval™ feature. This controller will work on all GE Water Technologies valves from the three quarter-inch 255 all the way up to the sixinch AquaMatic valve-nest system. |