Installation Tools and Helpers, Well Screens

Pipe Puller

Allows easier installation and removal of submersible pumps hung on coil plastic pipe. Fits 5-5/8" to 8" casings.

Adjustable Pipe Holder

Securely holds steel pipe from 1" to 2". Easy adjustment.

Taper Tap Pipe Fishing Tool

Designed to retrieve 3/8" through 1¼" pipe. Heat treated for maximum engagement and long life. Supplied with 1" male iron pipe threads.

Sentry Flow Meter

The SENTRY I FLOW METER was developed to provide accurate flow rates of pumps from 0 – 100 PSI, at flow rates anywhere from 4 – 24 gpm. By adjusting the handy ball-valve, the SENTRY I FLOW METER can tell you the condition of the pressure tank, pressure switch, pump and if there are any restrictions in the water line. This will help to determine if the problem is in the water pump system or in the water distribution system. The meter is also ideal for detecting scaling in pipes in city water applications by showing low flow rates and severe pressure drops.

Drop Pipe Vise Grips

For removing or installing drop pipe, steel vise type grip. 1000 lb. non-shock load limit.

Stainless Steel Screens w/Threaded End Fittings

Our rod based stainless steel well screens feature non-clogging wedge wire welded construction. They are telescope size, designed to be set in place by lowering the screen through the well casing. After positioning the casing is pulled back to expose the screen to the water bearing formation.

Malleable Steel Plugs (Used For Screen Bottoms)

Malleable steel plugs used to close the bottom of well screens.