We will be closed December 24th/25th and December 31st & January 1st

  • call 1-888-378-9021
  • query_builder Mon-Fri / 8am to 5pm EST

We are currently monitoring potential hurricane Helene as is moves toward the gulf and Florida. As of now, we will be tentatively closed 09/26 & 09/27. We will update as things progress.

Selective Resins

ILLUSTRATION &
PART NUMBER
DESCRIPTION SUGG. RETAIL
PAGE 4 - 7






Selective Ion Exchange Resin and Media




RESINTECH NITRATE SELECTIVE RESIN

$568.00



RESINTECH ORGANICS & TANNIN RESIN

$539.00



RESINTECH TANNIN RESIN - MACROPOROUS TYPE 1

$619.00

 


PUROLITE TAN EX RESIN

$1,389.00
$709.00



PUROLITE SST-60 HIGH EFFICIENCY SOFTENING RESIN

$144.00
$207.00
$261.00


RESINTECH ASM-10-HP - ARSENIC REMOVAL

$1,075.00

 

SIR-100-HP is a strong base anion exchange resin supplied in the chloride
form as moist, tough, uniform spherical beads. It is especially useful in nitrate
removal applications due to its ability to remove nitrates preferentially in the presence
of sulfates and other divalent ions.


The use of SIR-100-HP eliminates nitrate dumping and retains a greater degree of
its operating capacity in the presence of high levels of sulfates where standard
anion resins such as ResinTech SBG1, SBG1P, or SBG2, would suffer loss in
operating efficiencies and exhibit nitrate dumping in the presence of sulfates.
SIR-100-HP is also intended for use in applications involving monovalent and
divalent ions where the monovalent ion must be removed preferentially, such as in
removing perchlorates from ground waters.

SBACR-HP is a high capacity, organic fouling resistant, gelular, acrylic Type
One, strongly basic anion resin, supplied in the chloride or hydroxide form as
moist, tough, uniform spherical beads. SBACR-HP is intended for use in all types
of deionization systems and chemical processing applications, where water temperatures do not exceed 90 Deg. F. Demineralization – SBACR-HP is highly
recommended for use in multiple and mixed bed demineralizers, where-ever
complete ion removal and organic fouling resistance is required.

SBACR-MP-HP is a high capacity organic fouling resistant macroporous acrylic Type 1 strongly basic, anion resin, supplied in the chloride form as moist, tough, uniform spherical beads. It is intended for use in all types of deionization systems and chemical processing applications.

Tan Ex is exchange resin for the adsorbtion of soluble tannins that contribute to
color and taste in drinking water. Removes a wide range of metal hydrides
and exides and colloidal matter from water, while operating a chloride cycle.

SST-60 is a high-efficiency softening resin based on gel type shallow-shell technology. Lower hardness leakage. Significant savings in salt usage.The shorter the diffusion path, the more rapid the softening exchange occurs. Reducing the depth of
penetration required to cleanse the resin allows for a more complete regeneration
and provides a higher, more efficient utilization of the regenerant. The result is a
resin with unsurpassed salt efficiency, lower leakage and reduced rinse water
requirements.

ASM-10-HP is a strongly-basic hybrid anion exchange resin formulated to selectively remove arsenic. It is supplied in the salt form as clean, moist, tough, uniform, spherical beads. Exhibits extraordinary throughput capacity in arsenic removal service on potable water supplies. Its performance is virtually unaffected by common anions, such as chlorides, bicarbonates or sulfates. It is effective over the
entire pH range of potable water. It has the highest arsenic removal capacity of
organic based arsenic removal media, with no Arsenic dumping - effluent arsenic
levels will not exceed influent levels if resin is operated past exhaustion point.
Spherical and uniform particle size provides low pressure drop and greater resistance to bed compaction. Unlike granular, coated media, will not shed particles.
Made from NSF/ANSI-61-validated Anion Exchange Resin.

PAGE 4 - 7

 

There are no products to list in this category.
Cart