Distributor Heads, Test Lights

Air Mix Tank Heads

Machined PVC head used on air mix tanks. Standard heads are tapped 3/4" FIPT in and out, 1/8" FIPT air release tapping. Optional heads are tapped 1" FIPT in and out, 1/8" FIPT air release tapping.

Plastic Distributor Heads

Designed for simple in-out filters such as pH neutralizers, taste and odor, etc. Fits 2½" NPSM tank opening. The 890S has 3/4" openings and 13/16" distributor opening. The 990S and the 900M has 1" FIPT openings with 1.050" distributor opening.

HEAD-07-GRAY

Resilite LED Test Lights

The patented Squarewave Resilite is a positive, reliable and economical method of monitoring water quality via conductivity. Bright red/green visual output is easy to read. The monitoring is simple: the green light indicates the water conductivity is below the threshold value, the red light warns that it is above. Uses a wall transformer to convert 100v to 9v to insure safe operation and longer life. 220v European is also available. When ordering make sure to specify conductance. Available in 2 Meg ohm, 1 Meg ohm, 500k, 200k, 50k, 20k, 10k and 5k.

Neon Lamp Test Lights

Designed for low-cost monitoring of water conductivity: the Neon lamp is on when the conductivity is below the threshold value. The lamp turns off when the conductivity rises above the threshold value. The fail-safe design signals trouble if there is a power failure or the bulb burns out. The test light incorporate an isolation power pack. The isolation power pack isolates the test light and user from the 110v or 220v power source. Also available in a remote model. The neon bulb can be panel mounted up to 50' maximum away from the test cell. When ordering make sure to specify conductance.
Available in 1 Meg ohm, 500k, 200k, 50k and 20k.