Autotrol Logix Controlled Valves

Autotrol 255 Valves with Logix Controllers

Autotrol 268 Performa Valves with Logix Controllers

Autotrol 263 Performa Filter Valve with Logix Controller

Autotrol 268 Performa FA Filter Valve with Logix Controller

Logix Injector Assemblies

Autotrol Logix Series Controlled Valves

The Logix Controller is unrivaled in simplicity and is easier to program than any other electronic controller on the market today. The Logix Controller is factory-programmed with complete salt tables and operational parameters. The resin volume is set, then only the time of day, day of the week,
hardness and the salt amount needs to be set. 12 Volt AC Adapter.

The Logix 740 time clock – This simple time clock controller gives the installer the option of a 7-day (day of the week) or up to a 99-day regeneration frequency setting. The 740 can also be used for either a softener or filter application (with adjustable backwash time). Includes a remote regeneration
signal input. This controller is great for residential and light commercial applications up to 3 ft3 of
resin.

The Logix 742 time clock – This control has been enhanced for C&I applications. The 742 offers fullyprogrammable cycle times, salt setting in 1-pound increments, as well as the Maintenance Interval™ feature. This controller will work on all GE Water Technologies valves from the three quarter-inch 255 all the way up to the sixinch AquaMatic valve-nest system.

The Logix 760 demand controller – This economy model demand control will set a new standard for simple and efficient controllers. The 760 includes single programming, with a 28-day variable reserve feature and the ability to change the time of regeneration. This cost-effective controller is a great for residential and light commercial applications up to 3 ft3 of resin.

The Logix 762 demand controller – This control has been enhanced for C&I applications. The 762 offers fully-programmable cycle times, salt setting in 1-pound increments, as well as the Maintenance Interval™ feature. This controller will work on all GE Water Technologies valves from the three quarter-inch 255 all the way up to the sixinch AquaMatic valve-nest system.